The Ferrocontrol DARC S35-00-05 is a digital axis controller (servo controller) from the Ferrocontrol DARC system for brushless three-phase synchronous motors with a rated current of 35 A. In the DARC, positioning and servo amplifier are combined in one unit.
Function within the DARC system
The axis controller is connected to a DARC supply module (V05 or V15) and converts the 560 V DC link voltage provided there into the three-phase motor voltage. Several servo modules can be coupled in parallel on the DC link, up to eight drives per supply module. The controller receives positioning commands via the fieldbus from the supply module with interpolation processor or, for simple tasks, directly via the RS232 interface.
Further features
- Fully digital parameterisation, service replacement without readjustment
- Motor temperature monitoring via PTC sensor or temperature switch
- Relay contact for the holding brake (30 V / 1 A)
- Opto-isolated control inputs, plain-text diagnostics via the higher-level control
- Compact design, protection class IP20, CE-compliant
Control and feedback
Control is fully digital with online-optimised control parameters. Rotor position and actual speed are acquired via the robust resolver feedback with up to 16-bit resolution. Hardware version 00 denotes the basic version with resolver interface. Sinusoidal pulse-width modulation ensures smooth running even at the lowest speeds, and IGBT power stages with a 2 × 8 kHz switching frequency ensure minimal losses and quiet operation.
Technical data
- Type: DARC S35, drive type S = synchronous motors
- DC link voltage: 560 V DC (permissible 480 V to 650 V)
- Rated output current: 35 A rms
- Peak output current: 70 A rms (max. 5 s)
- Output voltage: 0 to mains voltage
- Feedback: resolver
- Power stage switching frequency: 2 × 8 kHz
- Electronics supply: 24 V DC / 0.6 A
- Power loss: 15 W with power stage disabled, 395 W at rated load
- Cooling: fan; ambient temperature 0 °C to 40 °C
- Dimensions (W × H × D): 88 × 400 × 335 mm, weight 10 kg
- Protection class: IP20 (DIN 40050)
Proven in machine building
The DARC S35-00-05 is used by machine manufacturers such as Rapid, Urban, IMA Schelling, Kiesling, Siempelkamp, Actual, Perforex, MAW Nottmeyer and Josting. Please state the machine type and part number with your inquiry so that we can supply the controller with matching firmware and parameter sets (Plug and Work).
Procurement from Finke Maschinen
The DARC S35-00-05 is available from Finke Maschinen as a new device, a refurbished unit with warranty or a tested used part. Benefit from short delivery times, fair prices and expert advice from our Ferrocontrol and Eckelmann specialists.
