The Ferrocontrol DARC V15-11-10-0S for Elumatec is a supply module with 15 kW rated power for the Ferrocontrol DARC drive system, in the version with interpolation processor, connected via CNC fieldbus in SBZ version. This version is parameterised for machines made by Elumatec. The module provides the DC link voltage for up to eight axis controllers and handles the higher-level communication of the system.

Function within the DARC system
The supply module is operated directly on the three-phase mains (3 × 400 V, 380 V −10 % to 415 V +10 %, 50/60 Hz) and generates the 560 V DC link voltage for the connected axis controllers without a power transformer. Via the CNC fieldbus in SBZ version it receives positioning commands from the higher-level control and coordinates the data exchange with the axis controllers over the system bus; the RS232 service interface is used for parameterisation, commissioning and simple axis positioning from a PC.

Further features

• Direct mains supply without transformer, integrated mains filter for EN 55011 group 1 class A
• DC link choke and connection for an external braking resistor
• Relay contact for ready signal (30 V / 1 A), opto-isolated control inputs
• 24 V DC electronics supply, protection class IP20, convection cooling
• Plain-text diagnostics and service replacement without readjustment, CE-compliant

Equipment
Hardware version 10: with integrated interpolation processor (IPR). The integrated interpolation processor executes positioning commands independently. Thanks to this decentralised intelligence, a real-time fieldbus is not required.

Technical data

• Type: DARC V15, supply module 15 kW
• Mains connection: 3 × 400 V AC (380 V −10 % to 415 V +10 %), 50 to 60 Hz, mains current 32 A
• DC link: 560 V DC, rated current 27 A, rated power 15 kW, peak power 30 kW (max. 7 s)
• External braking resistor: min. 16 Ω, peak braking power 28 kW
• DC link choke: 0.4 mH / 30 A
• Fieldbus: CNC fieldbus in SBZ version; RS232 service interface
• Hardware version: with interpolation processor
• Electronics supply: 24 V DC / 0.6 A (18 V to 30 V)
• Power loss: 15 W at no load, 77 W at rated load (without braking resistor)
• Cooling: convection; ambient temperature 0 °C to 45 °C (derating 3 % per K up to 60 °C)
• Dimensions (W × H × D): 88 × 400 × 335 mm, weight 6 kg
• Protection class: IP20 (DIN 40050)

Used in Elumatec machines
In this version the DARC V15-11-10-0S is equipped with the firmware and parameter sets matching the Elumatec machine type (Plug and Work). Please state the machine type and part number with your inquiry.

Procurement from Finke Maschinen
The DARC V15-11-10-0S is available from Finke Maschinen as a refurbished unit with warranty or as a tested used part; new units only from remaining stock while supplies last. The DARC series has been discontinued by the manufacturer and cannot be reordered; its successor is the DARC2 series. Benefit from short delivery times, fair prices and expert advice from our Ferrocontrol and Eckelmann specialists.